XTOOL KS-1 Smart Key Emulator for Toyota Lexus All Keys Lost Work with X100 PAD2/PAD3
Xtool KS-1 Deion:
KS-1 The five-in-one simulation card can eliminate the need to disassemble the smart box and other modules.
As long as the original car data is read from the OBD to generate the
simulation card, the ignition switch can be turned on to realize the
function of clearing and adding the smart key.
Highlights of Xtool KS-1:
1.Toyota/Lexus All Lost No Need Disassembly
2. Support Toyota/Lexus all key lost and dismantled,read the original
car data from OBD to generate emergency simulation key,directly drive
the car without disassemble, intelligent and efficient
3. Intelligently Generate New Keys
4. Through reading of the original car data, a smart key is generated,
which can be operated according to the process of adding a key.
Supporting generation,copying and simulation functions of the key chip
5. Support Toyota 94 / D4, 98, 39, 88 / A8, A9 type smart key all-key-lost matching. Matching speed is fast
6. The simulation card can be reused. After matching the key, turn off
the power or remove the battery to restore the initial state.
7. Functions also includes generation, copy and simulation of key chip.
Compatible With Those Devices:
X100 PAD2 PRO
X100 PAD3
XTOOL X100 PAD2 (Need Buy KC100)
A80 (Need Buy KC100)
PS90 (Need Buy KC100)
H6 (Need Buy KC100)
X100 PAD Elite (Need Buy KC100)
Xtool KS-1 Key Type Support List: (Keep Updating)
| NO. |
Vehicle |
Year |
Key Type |
Support or Not |
Remarks |
| 1 |
RAV4 |
2015 |
88 |
Yes |
|
| 2 |
Alphard |
2013 |
94 |
Yes |
|
| 3 |
Alphard |
2015 |
A9 |
Yes |
|
| 4 |
Previa |
2008 |
94 |
Yes |
|
| 5 |
Crown |
2010 |
98 |
Yes |
|
| 6 |
Crown |
2015 |
A8 |
Yes |
|
| 7 |
Crown |
2016 |
A8 |
No |
After 2016,Toyota Crown is not supported |
| 8 |
Prado |
2011 |
98 |
Yes |
|
| 9 |
Previa |
2013 |
94 |
Yes |
|
| 10 |
Reiz |
2011 |
98 |
Yes |
|
| 11 |
Innova |
|
39 |
Yes |
The car is being tested for the Indian Tango |
Xtool KS-1 Specifications:
| Parameter |
Index |
| Battery |
CR2025 3V 165mAh |
| Standby current |
Standby current≤2μA |
| Reading and writing frequency |
125kHz |
| Status Indicator Lamp |
1pc (mode: turn on and light up for 2s and then extinguish; Flicker, flash, 0.5s/ time when writing or reading) |
| Update |
The simulation card firmware can be updated with KC100 |
| Working temperature |
-20℃~60℃ |
| Storage temperature |
-20℃~70℃ |
| Structure size |
66mm*40mm*12mm |
Package List
1pc x KS-1 Emulator
You need to log in to view the content,
Click here to login
Sorry,No related products.
